K Enerji
KE-ERV-V300 fresh-air purifier, front view
Home › Air Purifier › KE-ERV-V300
Tower Series · 300 m³/h

KE-ERV-V300 fresh-air purifier

The compact Tower Series model for flats, single floors of detached houses, small offices and healthcare units. Every hour it filters 300 m³ of outdoor air and expels the same volume of stale air.

300 m³/hfresh-air flow
99%HEPA filtration
82%heat recovery
70 Wat top speed
23 dB(A)sleep mode
50–120 m²recommended area
Applications

Which spaces is it designed for?

The KE-ERV-V300 is sized to meet the fresh-air needs of a single living area or a small unit of a few rooms. Typical uses include a medium-sized flat for a household of four or five, the bedroom floors of a detached house, an office for 6–8 people, a doctor's surgery, a pharmacy or a small nursery classroom.

When choosing a model, the number of people in the space at the same time matters as much as the floor area. At 30 m³ per person, an airflow of 300 m³/h is enough for about 10 people. If the area exceeds 120 m² or the space is often crowded, the KE-ERV-V600 is the better choice.

Positioning

The cabinet is 560 mm wide, 410 mm deep and 1,580 mm high, and weighs 55 kg. It fits into a narrow recess in front of an external wall or beside a window. The rear connections line up directly with the wall penetrations; if the hole does not sit right behind the unit, it can be offset slightly using flexible duct.

KE-ERV-V300 with the cover open: fans, exchanger and filter rails
Airflow

Compact cabinet, three jet outlets

Filtered fresh air is supplied through three round outlets on top of the cabinet. Each outlet can be turned by hand, so you can direct the air towards a seating area, a desk or the ceiling. The jet flow carries air far across the upper layer of the room and, because it does not blow directly at people, it does not cause draughts.

Stale air is drawn in through a grille on the side of the cabinet and passes through the return pre-filter before reaching the exchanger. The unit supplies slightly more air than it extracts, keeping the space under gentle positive pressure so that unfiltered air does not leak in through gaps.

Consumption

70 W for 300 m³ an hour

Both fans have brushless DC motors with 8 speed settings. At the highest speed, total power input is 70 W. In automatic mode, fan speed is set not by the user but by the PM2.5 sensor in the cabinet: the speed rises as outdoor air quality worsens and drops as it improves.

The exchanger's contribution far outweighs the fans' consumption. On a day when it is 0 degrees outside and 22 degrees inside, heating 300 m³/h of fresh air takes about 2.2 kW, and the KE-ERV-V300 recovers around 1.8 kW of that from the exhaust air.

Front-panel display: PM2.5, temperature, humidity and fan speed
Technical specifications

KE-ERV-V300 specification sheet

SpecificationKE-ERV-V300
Fresh-air flow rate300 m³/h
Recommended floor area50–120 m²
Heat recovery (temperature efficiency)82%
Exchanger typeCross-flow total heat (enthalpy) exchanger
Filter stagesPre-filter, PM2.5 filter, HEPA composite
HEPA filtration efficiency99%
Purification modesPM2.5 · Deep · Ultra (30 min)
Power input70 W
Mains supply220 V~ / 50 Hz
FanBrushless DC, 8 speeds
Sound pressure25–36 dB(A) · sleep mode 23 dB(A)
ControlsTouch panel, wireless remote
Measured valuesPM2.5, temperature, relative humidity
OperationManual, automatic, timer
Supply outlets3 jets (single row)
Dimensions (W × D × H)560 × 410 × 1,580 mm
Weight55 kg
InstallationFloor-standing, ductless
CertificationCE

Values are nominal figures measured under the manufacturer's test conditions. Source: K Enerji Tower Series Product Brochure (2026).

Safety

Locking cover and automatic power cut-off

The front cover opens with a key. As soon as it is opened, a safety switch in the cabinet cuts power to the unit, so the fans stay still while you change filters. A child lock on both the remote and the panel stops settings being changed by accident in places where children are present, such as schools and homes.

The filters sit on rails and slide out from the front without tools. The pre-filters are washable; the PM2.5 filter is replaced every 6 months and the HEPA composite filter once a year.

Sliding the PM2.5 filter out along its rail
Images

A closer look at the KE-ERV-V300

KE-ERV-V300 front view with three jet outlets
KE-ERV-V300 front view with three jet outlets
HEPA composite filter in the final stage
HEPA composite filter in the final stage
Cross-flow total heat exchanger
Cross-flow total heat exchanger
PDFProduct brochure (PDF, Turkish)KE-ERV-V300 · KE-ERV-V600 · 16 pages · Turkish · 5.7 MBDownload
Questions

KE-ERV-V300: your questions answered

How many people can the KE-ERV-V300 serve?

Based on 30 m³ of fresh air per person per hour, it covers about 10 people. The brochure recommends a floor area of 50–120 m².

How much electricity does the unit use?

It draws 70 W at its highest speed. The brushless DC fans use less at lower speeds.

Do the fans keep running when I open the cover?

No. A safety switch cuts power to the unit the moment the cover is opened. The cover is also key-locked.

What does the display show?

The front-panel display shows the indoor PM2.5 level, room temperature and relative humidity, along with an 8-step speed bar and a clock.

Are the filters or controls different on the V300 and V600?

No. Both models have the same filter stages, exchanger, controls and safety features. They differ only in airflow, cabinet height and the number of jet outlets.

Get a quote for the KE-ERV-V300

Tell us the floor area, the number of occupants and the province where the building is located; we will share a site survey and installation plan.

How many panels?Free solar calculator